Total
33822 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38099 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken A SCO connection without the proper voice_setting can cause the controller to lock up. | |||||
| CVE-2025-38105 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too. | |||||
| CVE-2022-50151 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix random warning message when driver load Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0 pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... } kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning. GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely. | |||||
| CVE-2025-38125 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring EST If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code. | |||||
| CVE-2025-38127 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix Tx scheduler error handling in XDP callback When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice] [...] [ +0.002715] Call Trace: [ +0.002452] <IRQ> [ +0.002021] ? __die_body.cold+0x19/0x29 [ +0.003922] ? die_addr+0x3c/0x60 [ +0.003319] ? exc_general_protection+0x17c/0x400 [ +0.004707] ? asm_exc_general_protection+0x26/0x30 [ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice] [ +0.004835] ice_napi_poll+0x665/0x680 [ice] [ +0.004320] __napi_poll+0x28/0x190 [ +0.003500] net_rx_action+0x198/0x360 [ +0.003752] ? update_rq_clock+0x39/0x220 [ +0.004013] handle_softirqs+0xf1/0x340 [ +0.003840] ? sched_clock_cpu+0xf/0x1f0 [ +0.003925] __irq_exit_rcu+0xc2/0xe0 [ +0.003665] common_interrupt+0x85/0xa0 [ +0.003839] </IRQ> [ +0.002098] <TASK> [ +0.002106] asm_common_interrupt+0x26/0x40 [ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690 Fix this by performing the missing unmapping of XDP queues from q_vectors and setting the XDP rings pointer back to NULL after all those queues are released. Also, add an immediate exit from the XDP callback in case of ring preparation failure. | |||||
| CVE-2025-38128 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data (i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes). Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()' to do 'skb_put_data()' from an area beyond the one actually passed to 'mgmt_hci_cmd_sync()'. | |||||
| CVE-2025-38261 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM. | |||||
| CVE-2025-38246 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated--- | |||||
| CVE-2025-38132 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: coresight: holding cscfg_csdev_lock while removing cscfg from csdev There'll be possible race scenario for coresight config: CPU0 CPU1 (perf enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() <iterating config_csdev_list> cscfg_remove_owned_csdev_configs() // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) iterating config_csdev_list could be raced with config_csdev_list's entry delete. To resolve this race , hold csdev->cscfg_csdev_lock() while cscfg_remove_owned_csdev_configs() | |||||
| CVE-2025-38140 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target. | |||||
| CVE-2025-38162 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: prevent overflow in lookup table allocation When calculating the lookup table size, ensure the following multiplication does not overflow: - desc->field_len[] maximum value is U8_MAX multiplied by NFT_PIPAPO_GROUPS_PER_BYTE(f) that can be 2, worst case. - NFT_PIPAPO_BUCKETS(f->bb) is 2^8, worst case. - sizeof(unsigned long), from sizeof(*f->lt), lt in struct nft_pipapo_field. Then, use check_mul_overflow() to multiply by bucket size and then use check_add_overflow() to the alignment for avx2 (if needed). Finally, add lt_size_check_overflow() helper and use it to consolidate this. While at it, replace leftover allocation using the GFP_KERNEL to GFP_KERNEL_ACCOUNT for consistency, in pipapo_resize(). | |||||
| CVE-2025-38164 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid inconsistence in between SIT and SSA w/ below testcase, it will cause inconsistence in between SIT and SSA. create_null_blk 512 2 1024 1024 mkfs.f2fs -m /dev/nullb0 mount /dev/nullb0 /mnt/f2fs/ touch /mnt/f2fs/file f2fs_io pinfile set /mnt/f2fs/file fallocate -l 4GiB /mnt/f2fs/file F2FS-fs (nullb0): Inconsistent segment (0) type [1, 0] in SSA and SIT CPU: 5 UID: 0 PID: 2398 Comm: fallocate Tainted: G O 6.13.0-rc1 #84 Tainted: [O]=OOT_MODULE Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: <TASK> dump_stack_lvl+0xb3/0xd0 dump_stack+0x14/0x20 f2fs_handle_critical_error+0x18c/0x220 [f2fs] f2fs_stop_checkpoint+0x38/0x50 [f2fs] do_garbage_collect+0x674/0x6e0 [f2fs] f2fs_gc_range+0x12b/0x230 [f2fs] f2fs_allocate_pinning_section+0x5c/0x150 [f2fs] f2fs_expand_inode_data+0x1cc/0x3c0 [f2fs] f2fs_fallocate+0x3c3/0x410 [f2fs] vfs_fallocate+0x15f/0x4b0 __x64_sys_fallocate+0x4a/0x80 x64_sys_call+0x15e8/0x1b80 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f9dba5197ca F2FS-fs (nullb0): Stopped filesystem due to reason: 4 The reason is f2fs_gc_range() may try to migrate block in curseg, however, its SSA block is not uptodate due to the last summary block data is still in cache of curseg. In this patch, we add a condition in f2fs_gc_range() to check whether section is opened or not, and skip block migration for opened section. | |||||
| CVE-2025-38168 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf: arm-ni: Unregister PMUs on probe failure When a resource allocation fails in one clock domain of an NI device, we need to properly roll back all previously registered perf PMUs in other clock domains of the same device. Otherwise, it can lead to kernel panics. Calling arm_ni_init+0x0/0xff8 [arm_ni] @ 2374 arm-ni ARMHCB70:00: Failed to request PMU region 0x1f3c13000 arm-ni ARMHCB70:00: probe with driver arm-ni failed with error -16 list_add corruption: next->prev should be prev (fffffd01e9698a18), but was 0000000000000000. (next=ffff10001a0decc8). pstate: 6340009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : list_add_valid_or_report+0x7c/0xb8 lr : list_add_valid_or_report+0x7c/0xb8 Call trace: __list_add_valid_or_report+0x7c/0xb8 perf_pmu_register+0x22c/0x3a0 arm_ni_probe+0x554/0x70c [arm_ni] platform_probe+0x70/0xe8 really_probe+0xc6/0x4d8 driver_probe_device+0x48/0x170 __driver_attach+0x8e/0x1c0 bus_for_each_dev+0x64/0xf0 driver_add+0x138/0x260 bus_add_driver+0x68/0x138 __platform_driver_register+0x2c/0x40 arm_ni_init+0x14/0x2a [arm_ni] do_init_module+0x36/0x298 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception SMP: stopping secondary CPUs | |||||
| CVE-2025-38169 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: Avoid clobbering kernel FPSIMD state with SMSTOP On system with SME, a thread's kernel FPSIMD state may be erroneously clobbered during a context switch immediately after that state is restored. Systems without SME are unaffected. If the CPU happens to be in streaming SVE mode before a context switch to a thread with kernel FPSIMD state, fpsimd_thread_switch() will restore the kernel FPSIMD state using fpsimd_load_kernel_state() while the CPU is still in streaming SVE mode. When fpsimd_thread_switch() subsequently calls fpsimd_flush_cpu_state(), this will execute an SMSTOP, causing an exit from streaming SVE mode. The exit from streaming SVE mode will cause the hardware to reset a number of FPSIMD/SVE/SME registers, clobbering the FPSIMD state. Fix this by calling fpsimd_flush_cpu_state() before restoring the kernel FPSIMD state. | |||||
| CVE-2025-52639 | 1 Hcltech | 1 Connections | 2025-11-20 | N/A | 3.5 LOW |
| HCL Connections is vulnerable to a sensitive information disclosure vulnerability which could allow a user to obtain sensitive information they are not entitled to, caused by improper rendering of application data. | |||||
| CVE-2012-1987 | 1 Puppet | 2 Puppet, Puppet Enterprise | 2025-11-20 | 3.5 LOW | N/A |
| Unspecified vulnerability in Puppet 2.6.x before 2.6.15 and 2.7.x before 2.7.13, and Puppet Enterprise (PE) Users 1.0, 1.1, 1.2.x, 2.0.x, and 2.5.x before 2.5.1 allows remote authenticated users with agent SSL keys to (1) cause a denial of service (memory consumption) via a REST request to a stream that triggers a thread block, as demonstrated using CVE-2012-1986 and /dev/random; or (2) cause a denial of service (filesystem consumption) via crafted REST requests that use "a marshaled form of a Puppet::FileBucket::File object" to write to arbitrary file locations. | |||||
| CVE-2025-38272 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: b53: do not enable EEE on bcm63xx BCM63xx internal switches do not support EEE, but provide multiple RGMII ports where external PHYs may be connected. If one of these PHYs are EEE capable, we may try to enable EEE for the MACs, which then hangs the system on access of the (non-existent) EEE registers. Fix this by checking if the switch actually supports EEE before attempting to configure it. | |||||
| CVE-2025-38270 | 1 Linux | 1 Linux Kernel | 2025-11-20 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. | |||||
| CVE-2025-38278 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200 | |||||
| CVE-2025-38283 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: bugfix live migration function without VF device driver If the VF device driver is not loaded in the Guest OS and we attempt to perform device data migration, the address of the migrated data will be NULL. The live migration recovery operation on the destination side will access a null address value, which will cause access errors. Therefore, live migration of VMs without added VF device drivers does not require device data migration. In addition, when the queue address data obtained by the destination is empty, device queue recovery processing will not be performed. | |||||