Total
4456 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53144 | 1 Linux | 1 Linux Kernel | 2025-11-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms As the call trace shown, the root cause is kunmap incorrect pages: BUG: kernel NULL pointer dereference, address: 00000000 CPU: 1 PID: 40 Comm: kworker/u5:0 Not tainted 6.2.0-rc5 #4 Workqueue: erofs_worker z_erofs_decompressqueue_work EIP: z_erofs_lzma_decompress+0x34b/0x8ac z_erofs_decompress+0x12/0x14 z_erofs_decompress_queue+0x7e7/0xb1c z_erofs_decompressqueue_work+0x32/0x60 process_one_work+0x24b/0x4d8 ? process_one_work+0x1a4/0x4d8 worker_thread+0x14c/0x3fc kthread+0xe6/0x10c ? rescuer_thread+0x358/0x358 ? kthread_complete_and_exit+0x18/0x18 ret_from_fork+0x1c/0x28 ---[ end trace 0000000000000000 ]--- The bug is trivial and should be fixed now. It has no impact on !HIGHMEM platforms. | |||||
| CVE-2022-21546 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix WRITE_SAME No Data Buffer crash In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. | |||||
| CVE-2024-58237 | 1 Linux | 1 Linux Kernel | 2025-11-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: consider that tail calls invalidate packet pointers Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call. | |||||
| CVE-2025-37806 | 1 Linux | 1 Linux Kernel | 2025-11-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Keep write operations atomic syzbot reported a NULL pointer dereference in __generic_file_write_iter. [1] Before the write operation is completed, the user executes ioctl[2] to clear the compress flag of the file, which causes the is_compressed() judgment to return 0, further causing the program to enter the wrong process and call the wrong ops ntfs_aops_cmpr, which triggers the null pointer dereference of write_begin. Use inode lock to synchronize ioctl and write to avoid this case. [1] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000006 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=000000011896d000 [0000000000000000] pgd=0800000118b44403, p4d=0800000118b44403, pud=0800000117517403, pmd=0000000000000000 Internal error: Oops: 0000000086000006 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 6427 Comm: syz-executor347 Not tainted 6.13.0-rc3-syzkaller-g573067a5a685 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : generic_perform_write+0x29c/0x868 mm/filemap.c:4055 sp : ffff80009d4978a0 x29: ffff80009d4979c0 x28: dfff800000000000 x27: ffff80009d497bc8 x26: 0000000000000000 x25: ffff80009d497960 x24: ffff80008ba71c68 x23: 0000000000000000 x22: ffff0000c655dac0 x21: 0000000000001000 x20: 000000000000000c x19: 1ffff00013a92f2c x18: ffff0000e183aa1c x17: 0004060000000014 x16: ffff800083275834 x15: 0000000000000001 x14: 0000000000000000 x13: 0000000000000001 x12: ffff0000c655dac0 x11: 0000000000ff0100 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009d497980 x4 : ffff80009d497960 x3 : 0000000000001000 x2 : 0000000000000000 x1 : ffff0000e183a928 x0 : ffff0000d60b0fc0 Call trace: 0x0 (P) __generic_file_write_iter+0xfc/0x204 mm/filemap.c:4156 ntfs_file_write_iter+0x54c/0x630 fs/ntfs3/file.c:1267 new_sync_write fs/read_write.c:586 [inline] vfs_write+0x920/0xcf4 fs/read_write.c:679 ksys_write+0x15c/0x26c fs/read_write.c:731 __do_sys_write fs/read_write.c:742 [inline] __se_sys_write fs/read_write.c:739 [inline] __arm64_sys_write+0x7c/0x90 fs/read_write.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762 [2] ioctl$FS_IOC_SETFLAGS(r0, 0x40086602, &(0x7f00000000c0)=0x20) | |||||
| CVE-2025-37824 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated--- | |||||
| CVE-2022-49810 | 1 Linux | 1 Linux Kernel | 2025-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing xas_retry() calls in xarray iteration netfslib has a number of places in which it performs iteration of an xarray whilst being under the RCU read lock. It *should* call xas_retry() as the first thing inside of the loop and do "continue" if it returns true in case the xarray walker passed out a special value indicating that the walk needs to be redone from the root[*]. Fix this by adding the missing retry checks. [*] I wonder if this should be done inside xas_find(), xas_next_node() and suchlike, but I'm told that's not an simple change to effect. This can cause an oops like that below. Note the faulting address - this is an internal value (|0x2) returned from xarray. BUG: kernel NULL pointer dereference, address: 0000000000000402 ... RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs] ... Call Trace: netfs_rreq_assess+0xa6/0x240 [netfs] netfs_readpage+0x173/0x3b0 [netfs] ? init_wait_var_entry+0x50/0x50 filemap_read_page+0x33/0xf0 filemap_get_pages+0x2f2/0x3f0 filemap_read+0xaa/0x320 ? do_filp_open+0xb2/0x150 ? rmqueue+0x3be/0xe10 ceph_read_iter+0x1fe/0x680 [ceph] ? new_sync_read+0x115/0x1a0 new_sync_read+0x115/0x1a0 vfs_read+0xf3/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Changes: ======== ver #2) - Changed an unsigned int to a size_t to reduce the likelihood of an overflow as per Willy's suggestion. - Added an additional patch to fix the maths. | |||||
| CVE-2022-49806 | 1 Linux | 1 Linux Kernel | 2025-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() sparx_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: sparx_stats_init() create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. So as sparx5_start(). | |||||
| CVE-2022-49805 | 1 Linux | 1 Linux Kernel | 2025-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() lan966x_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: lan966x_stats_init() create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. | |||||
| CVE-2022-49802 | 1 Linux | 1 Linux Kernel | 2025-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix null pointer dereference in ftrace_add_mod() The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue. | |||||
| CVE-2025-46404 | 1 Entrouvert | 1 Lasso | 2025-11-07 | N/A | 7.5 HIGH |
| A denial of service vulnerability exists in the lasso_provider_verify_saml_signature functionality of Entr'ouvert Lasso 2.5.1. A specially crafted SAML response can lead to a denial of service. An attacker can send a malformed SAML response to trigger this vulnerability. | |||||
| CVE-2023-53058 | 1 Linux | 1 Linux Kernel | 2025-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, Fix an Oops in error handling code The error handling dereferences "vport". There is nothing we can do if it is an error pointer except returning the error code. | |||||
| CVE-2025-54334 | 1 Samsung | 14 Exynos 1280, Exynos 1280 Firmware, Exynos 1380 and 11 more | 2025-11-07 | N/A | 7.5 HIGH |
| An issue was discovered in the NPU driver in Samsung Mobile Processor Exynos 1280, 2200, 1380, 1480, 2400, 1580, 2500. There is a NULL Pointer Dereference of hdev in the __npu_vertex_bootup function. | |||||
| CVE-2025-54332 | 1 Samsung | 2 Exynos 1380, Exynos 1380 Firmware | 2025-11-07 | N/A | 7.5 HIGH |
| An issue was discovered in NPU in Samsung Mobile Processor Exynos 1380 through July 2025. There is a NULL Pointer Dereference of profiler.node in the npu_vertex_profileoff function. | |||||
| CVE-2024-36387 | 2 Apache, Netapp | 2 Http Server, Ontap | 2025-11-06 | N/A | 5.4 MEDIUM |
| Serving WebSocket protocol upgrades over a HTTP/2 connection could result in a Null Pointer dereference, leading to a crash of the server process, degrading performance. | |||||
| CVE-2025-37759 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix handling recovery & reissue in ublk_abort_queue() Commit 8284066946e6 ("ublk: grab request reference when the request is handled by userspace") doesn't grab request reference in case of recovery reissue. Then the request can be requeued & re-dispatch & failed when canceling uring command. If it is one zc request, the request can be freed before io_uring returns the zc buffer back, then cause kernel panic: [ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 126.773657] #PF: supervisor read access in kernel mode [ 126.774052] #PF: error_code(0x0000) - not-present page [ 126.774455] PGD 0 P4D 0 [ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI [ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full) [ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 [ 126.776275] Workqueue: iou_exit io_ring_exit_work [ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv] Fixes it by always grabbing request reference for aborting the request. | |||||
| CVE-2025-37774 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: slab: ensure slab->obj_exts is clear in a newly allocated slab page ktest recently reported crashes while running several buffered io tests with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack. The signature indicates an invalid address dereference with low bits of slab->obj_exts being set. The bits were outside of the range used by page_memcg_data_flags and objext_flags and hence were not masked out by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts. The typical crash log looks like this: 00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 00510 Mem abort info: 00510 ESR = 0x0000000096000045 00510 EC = 0x25: DABT (current EL), IL = 32 bits 00510 SET = 0, FnV = 0 00510 EA = 0, S1PTW = 0 00510 FSC = 0x05: level 1 translation fault 00510 Data abort info: 00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000 00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000 00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 00510 Internal error: Oops: 0000000096000045 [#1] SMP 00510 Modules linked in: 00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE 00510 Hardware name: linux,dummy-virt (DT) 00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190 00510 lr : __kmalloc_noprof+0x150/0x310 00510 sp : ffffff80c87df6c0 00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200 00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001 00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180 00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000 00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700 00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006 00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58 00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556 00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060 00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000 00510 Call trace: 00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P) 00510 __kmalloc_noprof+0x150/0x310 00510 __bch2_folio_create+0x5c/0xf8 00510 bch2_folio_create+0x2c/0x40 00510 bch2_readahead+0xc0/0x460 00510 read_pages+0x7c/0x230 00510 page_cache_ra_order+0x244/0x3a8 00510 page_cache_async_ra+0x124/0x170 00510 filemap_readahead.isra.0+0x58/0xa0 00510 filemap_get_pages+0x454/0x7b0 00510 filemap_read+0xdc/0x418 00510 bch2_read_iter+0x100/0x1b0 00510 vfs_read+0x214/0x300 00510 ksys_read+0x6c/0x108 00510 __arm64_sys_read+0x20/0x30 00510 invoke_syscall.constprop.0+0x54/0xe8 00510 do_el0_svc+0x44/0xc8 00510 el0_svc+0x18/0x58 00510 el0t_64_sync_handler+0x104/0x130 00510 el0t_64_sync+0x154/0x158 00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881) 00510 ---[ end trace 0000000000000000 ]--- 00510 Kernel panic - not syncing: Oops: Fatal exception 00510 SMP: stopping secondary CPUs 00510 Kernel Offset: disabled 00510 CPU features: 0x0000,000000e0,00000410,8240500b 00510 Memory Limit: none Investigation indicates that these bits are already set when we allocate slab page and are not zeroed out after allocation. We are not yet sure why these crashes start happening only recently but regardless of the reason, not initializing a field that gets used later is wrong. Fix it by initializing slab->obj_exts during slab page allocation. | |||||
| CVE-2025-37755 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: handle page_pool_dev_alloc_pages error page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page) but it would still proceed to use the NULL pointer and then crash. This is similar to commit 001ba0902046 ("net: fec: handle page_pool_dev_alloc_pages error"). This is found by our static analysis tool KNighter. | |||||
| CVE-2022-49796 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit() When test_gen_kprobe_cmd() failed after kprobe_event_gen_cmd_end(), it will goto delete, which will call kprobe_event_delete() and release the corresponding resource. However, the trace_array in gen_kretprobe_test will point to the invalid resource. Set gen_kretprobe_test to NULL after called kprobe_event_delete() to prevent null-ptr-deref. BUG: kernel NULL pointer dereference, address: 0000000000000070 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 246 Comm: modprobe Tainted: G W 6.1.0-rc1-00174-g9522dc5c87da-dirty #248 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:__ftrace_set_clr_event_nolock+0x53/0x1b0 Code: e8 82 26 fc ff 49 8b 1e c7 44 24 0c ea ff ff ff 49 39 de 0f 84 3c 01 00 00 c7 44 24 18 00 00 00 00 e8 61 26 fc ff 48 8b 6b 10 <44> 8b 65 70 4c 8b 6d 18 41 f7 c4 00 02 00 00 75 2f RSP: 0018:ffffc9000159fe00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810971d268 RCX: 0000000000000000 RDX: ffff8881080be600 RSI: ffffffff811b48ff RDI: ffff88810971d058 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc9000159fe58 R11: 0000000000000001 R12: ffffffffa0001064 R13: ffffffffa000106c R14: ffff88810971d238 R15: 0000000000000000 FS: 00007f89eeff6540(0000) GS:ffff88813b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000010599e004 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __ftrace_set_clr_event+0x3e/0x60 trace_array_set_clr_event+0x35/0x50 ? 0xffffffffa0000000 kprobe_event_gen_test_exit+0xcd/0x10b [kprobe_event_gen_test] __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f89eeb061b7 | |||||
| CVE-2022-49797 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit() When trace_get_event_file() failed, gen_kretprobe_test will be assigned as the error code. If module kprobe_event_gen_test is removed now, the null pointer dereference will happen in kprobe_event_gen_test_exit(). Check if gen_kprobe_test or gen_kretprobe_test is error code or NULL before dereference them. BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2210 Comm: modprobe Not tainted 6.1.0-rc1-00171-g2159299a3b74-dirty #217 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:kprobe_event_gen_test_exit+0x1c/0xb5 [kprobe_event_gen_test] Code: Unable to access opcode bytes at 0xffffffff9ffffff2. RSP: 0018:ffffc900015bfeb8 EFLAGS: 00010246 RAX: ffffffffffffffea RBX: ffffffffa0002080 RCX: 0000000000000000 RDX: ffffffffa0001054 RSI: ffffffffa0001064 RDI: ffffffffdfc6349c RBP: ffffffffa0000000 R08: 0000000000000004 R09: 00000000001e95c0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000800 R13: ffffffffa0002420 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f56b75be540(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff9ffffff2 CR3: 000000010874a006 CR4: 0000000000330ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | |||||
| CVE-2025-37783 | 1 Linux | 1 Linux Kernel | 2025-11-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check The function dpu_plane_virtual_atomic_check was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that plane_state is valid before dereferencing them. Similar to commit da29abe71e16 ("drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed"). Patchwork: https://patchwork.freedesktop.org/patch/643132/ | |||||