Total
2006 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39726 | 1 Linux | 1 Linux Kernel | 2025-11-25 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: fix concurrency management in ism_cmd() The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences. | |||||
| CVE-2014-1490 | 7 Canonical, Debian, Fedoraproject and 4 more | 13 Ubuntu Linux, Debian Linux, Fedora and 10 more | 2025-11-25 | 9.3 HIGH | N/A |
| Race condition in libssl in Mozilla Network Security Services (NSS) before 3.15.4, as used in Mozilla Firefox before 27.0, Firefox ESR 24.x before 24.3, Thunderbird before 24.3, SeaMonkey before 2.24, and other products, allows remote attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact via vectors involving a resumption handshake that triggers incorrect replacement of a session ticket. | |||||
| CVE-2022-50259 | 1 Linux | 1 Linux Kernel | 2025-11-25 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix race in sock_map_free() sock_map_free() calls release_sock(sk) without owning a reference on the socket. This can cause use-after-free as syzbot found [1] Jakub Sitnicki already took care of a similar issue in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") [1] refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: events_unbound bpf_map_free_deferred RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246 RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5 R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004 R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] __sock_put include/net/sock.h:779 [inline] tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092 release_sock+0xaf/0x1c0 net/core/sock.c:3468 sock_map_free+0x219/0x2c0 net/core/sock_map.c:356 process_one_work+0x81c/0xd10 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> | |||||
| CVE-2023-53166 | 1 Linux | 1 Linux Kernel | 2025-11-24 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power_changed() may get called while bq->charger has not been set yet leading to a NULL pointer dereference. This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting the connected charger-type which happens to exactly hit the small window: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0 <snip> Call Trace: <TASK> __power_supply_get_supplier_property+0x19/0x50 class_for_each_device+0xb1/0xe0 power_supply_get_property_from_supplier+0x2e/0x50 bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger] __power_supply_changed_work+0x30/0x40 class_for_each_device+0xb1/0xe0 power_supply_changed_work+0x5f/0xe0 <snip> Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in bq->charger, so bq25890_charger_external_power_changed() can simply directly use the passed in psy argument which is always valid. | |||||
| CVE-2025-54114 | 1 Microsoft | 10 Windows 10 1607, Windows 10 21h2, Windows 10 22h2 and 7 more | 2025-11-21 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Connected Devices Platform Service allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-64683 | 1 Jetbrains | 1 Hub | 2025-11-21 | N/A | 5.3 MEDIUM |
| In JetBrains Hub before 2025.3.104432 information disclosure was possible via the Users API | |||||
| CVE-2025-64773 | 1 Jetbrains | 1 Youtrack | 2025-11-21 | N/A | 2.7 LOW |
| In JetBrains YouTrack before 2025.3.104432 a race condition allowed bypass of helpdesk Agent limit | |||||
| CVE-2025-64682 | 1 Jetbrains | 1 Hub | 2025-11-20 | N/A | 2.7 LOW |
| In JetBrains Hub before 2025.3.104432 a race condition allowed bypass of the Agent-user limit | |||||
| CVE-2025-38290 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/[email protected]/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2025-13012 | 1 Mozilla | 1 Firefox | 2025-11-19 | N/A | 7.5 HIGH |
| Race condition in the Graphics component. This vulnerability affects Firefox < 145, Firefox ESR < 140.5, Firefox ESR < 115.30, Thunderbird < 145, and Thunderbird < 140.5. | |||||
| CVE-2025-38383 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix data race in show_numa_info() The following data-race was found in show_numa_info(): ================================================================== BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0: show_numa_info mm/vmalloc.c:4936 [inline] vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1: show_numa_info mm/vmalloc.c:4934 [inline] vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... value changed: 0x0000008f -> 0x00000000 ================================================================== According to this report,there is a read/write data-race because m->private is accessible to multiple CPUs. To fix this, instead of allocating the heap in proc_vmalloc_init() and passing the heap address to m->private, vmalloc_info_show() should allocate the heap. | |||||
| CVE-2025-12472 | 2025-11-19 | N/A | N/A | ||
| An attacker with a Looker Developer role could manipulate a LookML project to exploit a race condition during Git directory deletion, leading to arbitrary command execution on the Looker instance. Looker-hosted and Self-hosted were found to be vulnerable. This issue has already been mitigated for Looker-hosted instances. No user action is required for these. Self-hosted instances must be upgraded as soon as possible. This vulnerability has been patched in all supported versions of Self-hosted. The versions below have all been updated to protect from this vulnerability. You can download these versions at the Looker download page https://download.looker.com/ : * 24.12.103+ * 24.18.195+ * 25.0.72+ * 25.6.60+ * 25.8.42+ * 25.10.22+ | |||||
| CVE-2025-12383 | 2025-11-19 | N/A | N/A | ||
| In Eclipse Jersey versions 2.45, 3.0.16, 3.1.9 a race condition can cause ignoring of critical SSL configurations - such as mutual authentication, custom key/trust stores, and other security settings. This issue may result in SSLHandshakeException under normal circumstances, but under certain conditions, it could lead to unauthorized trust in insecure servers (see PoC) | |||||
| CVE-2025-38440 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- | |||||
| CVE-2025-38492 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix race between cache write completion and ALL_QUEUED being set When netfslib is issuing subrequests, the subrequests start processing immediately and may complete before we reach the end of the issuing function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED to indicate to the collector that we aren't going to issue any more subreqs and that it can do the final notifications and cleanup. Now, this isn't a problem if the request is synchronous (NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be done in-thread and we're guaranteed an opportunity to run the collector. However, if the request is asynchronous, collection is primarily triggered by the termination of subrequests queuing it on a workqueue. Now, a race can occur here if the app thread sets ALL_QUEUED after the last subrequest terminates. This can happen most easily with the copy2cache code (as used by Ceph) where, in the collection routine of a read request, an asynchronous write request is spawned to copy data to the cache. Folios are added to the write request as they're unlocked, but there may be a delay before ALL_QUEUED is set as the write subrequests may complete before we get there. If all the write subreqs have finished by the ALL_QUEUED point, no further events happen and the collection never happens, leaving the request hanging. Fix this by queuing the collector after setting ALL_QUEUED. This is a bit heavy-handed and it may be sufficient to do it only if there are no extant subreqs. Also add a tracepoint to cross-reference both requests in a copy-to-request operation and add a trace to the netfs_rreq tracepoint to indicate the setting of ALL_QUEUED. | |||||
| CVE-2025-38242 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated--- | |||||
| CVE-2022-50187 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 | |||||
| CVE-2025-38524 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale. | |||||
| CVE-2025-38306 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/fhandle.c: fix a race in call of has_locked_children() may_decode_fh() is calling has_locked_children() while holding no locks. That's an oopsable race... The rest of the callers are safe since they are holding namespace_sem and are guaranteed a positive refcount on the mount in question. Rename the current has_locked_children() to __has_locked_children(), make it static and switch the fs/namespace.c users to it. Make has_locked_children() a wrapper for __has_locked_children(), calling the latter under read_seqlock_excl(&mount_lock). | |||||
| CVE-2025-38358 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between async reclaim worker and close_ctree() Syzbot reported an assertion failure due to an attempt to add a delayed iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state: WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Modules linked in: CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: btrfs-endio-write btrfs_work_helper RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Code: 4e ad 5d (...) RSP: 0018:ffffc9000213f780 EFLAGS: 00010293 RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000 RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001 R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635 btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312 btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> This can happen due to a race with the async reclaim worker like this: 1) The async metadata reclaim worker enters shrink_delalloc(), which calls btrfs_start_delalloc_roots() with an nr_pages argument that has a value less than LONG_MAX, and that in turn enters start_delalloc_inodes(), which sets the local variable 'full_flush' to false because wbc->nr_to_write is less than LONG_MAX; 2) There it finds inode X in a root's delalloc list, grabs a reference for inode X (with igrab()), and triggers writeback for it with filemap_fdatawrite_wbc(), which creates an ordered extent for inode X; 3) The unmount sequence starts from another task, we enter close_ctree() and we flush the workqueue fs_info->endio_write_workers, which waits for the ordered extent for inode X to complete and when dropping the last reference of the ordered extent, with btrfs_put_ordered_extent(), when we call btrfs_add_delayed_iput() we don't add the inode to the list of delayed iputs because it has a refcount of 2, so we decrement it to 1 and return; 4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state; 5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now calls btrfs_add_delayed_iput() for inode X and there we trigger an assertion failure since the fs_info state has the flag BTRFS_FS_STATE_NO_DELAYED_IPUT set. Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for the async reclaim workers to finish, after we call cancel_work_sync() for them at close_ctree(), and by running delayed iputs after wait for the reclaim workers to finish and before setting the bit. This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed"). Without the new validation at btrfs_add_delayed_iput(), ---truncated--- | |||||